Expert Electric Blog

Electrical Ballast Replacement

Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

What is an electrical ballast replacement?

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Can I do a ballast replacement on my own?

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

What tools do I need to do a ballast replacement?

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.