Expert Electric Blog

Childproofing Your Home From Electrical Hazards

Our dependence on electricity is truly astonishing. In every room of your home you’ll find multiple ways electricity is used that we often take for granted. If not handled with care, electricity can pose serious threats of electric shock and burn. One way that these types of accidents can occur is when babies and children are able to roam freely and get their hands on electrical devices. Consider ways of childproofing your house from potential electrical hazards before a serious accident occurs. Our well-trained team at Expert Electric has compiled a list of measures so that you can get started.

Identifying Electrical Hazards

To identify any electrical hazards in your home, start by going room by room. For a more thorough approach, get down on your hands and knees to view the potential hazards from a child’s perspective. At this lower vantage point you are looking at all the electrical outlets, power strip bars and power cords. Be sure to look behind furniture and up on any side tables, dressers or counter tops. Make a list of electrical hazards that you have identified and get to work addressing those issues.

Childproofing Electrical Outlets

Childproofing your electrical outlets will be one of the most basic and simplest solutions. There are usually multiple outlets in each room and they seem to be attracted to them. Outlets are very tempting little spots on the wall for children to stick random objects into. To prevent this dangerous behavior from happening, install electrical outlet caps or safety plates over the top of unused outlets. This will block children from sticking their fingers and other items into the holes, which can cause the electrical current from flowing to the child. All unused outlets that are accessible to children should be covered.

Childproofing a Power Strip

Power bars are commonly used around the home to power numerous electrical devices located in the same room, such as a television system or computer setup. In these areas, multiple cords are often found tangled up in a pile and are all plugged into one power strip on the floor or in a cabinet. Childproofing a power strip can easily be done to protect your child from dangerous electrical shock or burn. Purchase and install power strip covers on child-accessible power bars. These covers wrap around the power bar and have a hole for the cords to exit. This helps to prevent children from tampering with and pulling out cords. At times gaps may occur in the covers hole, duct tape these areas to prevent little fingers from entering into the cover.

Securing Electrical Cords

Securing electrical cords will be an important safety measure. If a child can pull on an electrical cord to dislodge the prongs it can create an opportunity for electrical shock. Alternatively, the connected electrical device could fall down due to the tugging and cause an injury to the child’s head. Secure these types of hazards by tucking electrical cables safely out of reach or plugging them in different areas of the room not accessible to children. If the cords are too long, shorten them by rolling up the cord into your hand and tying with a zip tie. Any cords that run along the floor can be a tripping hazard and should be secured with strong tape or a rubber cord cover that can be purchased in any length.

We want to help you have piece of mind about your home and rest easy knowing you’re safe from electrical accidents. For more ideas or questions that you have regarding childproofing your home for electrical hazards, contact our trained and courteous technicians at Expert Electric. Call us today at 604-681-8338.